Hydrostatic Sensor Paver Finisher

Product Details:

HAP-045HD comes with Hydrostatic Transmission and Hydraulic Conveyor System. It is developed to provide better performance at low maintenance cost. It has minimum paving width of 2.5 meters and maximum paving width of 4.5 meters. The screed is infinitely hydraulically variable.
HAP-045HD can be used to lay bituminous materials as well as wet mix material (WMM).

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

UNIPAVE make sensor paver finisher with 5.5 meter paving width. Paver finisher model ESP-05. Suitable for paving WMM, Bituminus, DLC and GSB materials.

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

ASP-075 is a wheel mounted sensor paver finisher and it comes with hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, MOBA make sliding type control panel, dual operator seats, MOBA (Germany) make Matic sensor device for automatic slope & grade control and Sonic Sensor system for automatic material flow control.

ASP-075 has basic screed width of 2.75 meters and it is hydraulically extendable up to 4.9 meters and it can be further extended through bolt on extension up to 7.5 meters. The screed has vibration, tamping and heating facility up to 7.5 meters.

In ASP-075’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

Optional features: 1. Electric Screed Heating System, 2. Big Sonic Ski (Multiplex) Sensor Device

Additional Information:

• Delivery Time: 1 TO 4 WEEKS
• Packaging Details: LOOSE

Product Details:

Key Features:

1. Engine Power 130hp @ 2200 rpm (BS-IV)
2. Hydrostatic Transmission
3. Hydraulic Conveyor & Auger Drive
4. Adjustable Auger Height
5. Material Laying Capacity 300 TPH
6. Hopper Capacity 4.25 CM
7. Paving Width 2.5 m to 5.5 m Optional: up to 6.0 meters
8. Weight 14,470 kg
9. Four Wheels on Rear Axle
10. Wheels on Equalizer Beam
11. MOBA (Germany) Make Electronic Sensors
12. Double Operator Seats

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

Key Features:

1. Engine Power 130hp @ 2200 rpm (BS-IV)
2. Hydrostatic Transmission
3. Hydraulic Conveyor & Auger Drive
4. Adjustable Auger Height
5. Material Laying Capacity 300 TPH
6. Hopper Capacity 4.25 CM
7. Paving Width 2.5 m to 5.5 m Optional: up to 6.0 meters
8. Weight 14,470 kg
9. Four Wheels on Rear Axle
10. Wheels on Equalizer Beam
11. MOBA (Germany) Make Electronic Sensors
12. Double Operator Seats

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

Key Features:

1. Engine Power 130hp @ 2200 rpm (BS-IV)
2. Hydrostatic Transmission
3. Hydraulic Conveyor & Auger Drive
4. Adjustable Auger Height
5. Material Laying Capacity 300 TPH
6. Hopper Capacity 4.25 CM
7. Paving Width 2.5 m to 5.5 m Optional: up to 6.0 meters
8. Weight 14,470 kg
9. Four Wheels on Rear Axle
10. Wheels on Equalizer Beam
11. MOBA (Germany) Make Electronic Sensors
12. Double Operator Seats

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

Key Features:

1. Engine Power 130hp @ 2200 rpm (BS-IV)
2. Hydrostatic Transmission
3. Hydraulic Conveyor & Auger Drive
4. Adjustable Auger Height
5. Material Laying Capacity 300 TPH
6. Hopper Capacity 4.25 CM
7. Paving Width 2.5 m to 5.5 m Optional: up to 6.0 meters
8. Weight 14,470 kg
9. Four Wheels on Rear Axle
10. Wheels on Equalizer Beam
11. MOBA (Germany) Make Electronic Sensors
12. Double Operator Seats

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

UNIPAVE make road paver machine model ESP-05. This multi purpose machine can paver WMM and Asphalt materials.

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

HAP-045HD comes with Hydrostatic Transmission and Hydraulic Conveyor & Auger Drive. It is developed to provide better performance at low maintenance cost. It has minimum paving width of 2.5 meters and maximum paving width of 4.5 meters. The screed is infinitely hydraulically variable.

Smaller, stronger, and economical hydrostatic paver finisher model HAP-045HD also comes with sliding type control panel, dual operator seats, hydraulically extendable screed with vibration and heating facility and hydraulically operated hopper wings. All the functions are easily controlled from the main control panel, also there are two fix consoles on the screed, one on each side of the screed, to adjust the screed by the operator standing on the screed.

HAP-045HD’s hydraulic conveyor & auger drive increases output and reduces maintenance. Auto Limit Control Switch helps to control material flow automatically.

Material Suitability: Bituminous, Wet Mix, DLC & DBM Materials

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

Specifications:Prime MoverKirloskar make water-cooled electric start diesel engine, Model 6R 1080 TA1, 125 hp @ 2300 rpm or equivalentScreed width2.5 m basic width, Hydraulically extendable upto 4.5 m, further extension to 5.5 m by bolt on extensionRear WheelPneumatic Tyre4 Nos.Size: 10.00 x 20Screed Crown-1° / 4°Operator SeatDouble Operator SeatMachine SteeringHydrostatic steering for effortless operation.Screed HeatingLPG Gas burner (Manually operated)Front WheelSolid Rubber Tyre4 Nos. 550 Dia. x 175 mm widthScreed VibrationInfinitely variable up to 50.00 Hz (Max.)Slope & Grade ControlAuto & Manual mode throughElectronic sensor of MOBA, Germany makeMaterial Laying SuitabilityBitumin optional: Wetmix, DLC, DBM, GSBMachinery Accessories1. Canvas Canopy; 2. Working Lights, 3. Traveling Lights, 4. Tool Kit with Jack, 5. HornNote: Specifications/description are indicative and subject to change without notice due to modification alteration or custom engineering.

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE

Product Details:

ESP-05 is indigenously developed and the first wheel mounted hydrostatic paver finisher manufactured by UNIPAVE. ESP-05 has been gradually revived and upgraded looking over customer’s requirements. ESP-05 has combination of features like hydrostatic transmission, hydraulic drive for conveyor, 4 nos. rear wheels on equalizer beam, sliding type control panel, dual operator seats, hydraulically extendable screed with tamping, vibration and heating facility, and MOBA (Germany) make sensor device for automatic slope & grade control. In ESP-05’s Equalizer Beam feature, the two pairs of wheels are connected with the chassis by means of a pivoted joint, which allows the wheel pair to oscillate independent of each other and the wheels do not loose contact with ground when the surface is uneven. The Equalizer Beam feature averages the unevenness of the ground and provides better finish while paving. It also distributes loads on all the wheels which provides better grip on the ground.

Additional Information:

• Delivery Time: 1 TO 3 WEEKS
• Packaging Details: LOOSE